Monday, July 4, 2011

The Best Way to Make Ice

Article - Submitted by: jacob@water-softener-reviews.org
First of all, you can make ice cubes from water produced by RO Systems. In fact, ice made from reverse osmosis, or RO, water produces cleaner, clearer and better tasting ice cubes because most of the bacterias are removed from the water. So, just because water is purified by a certain procedure, (in this case, reverse osmosis), has no bearing on whether we can make ice. I prefer “clean ice” – in many cases it is perfectly see through, except for a little bubble in the center of the ice cube. Also the benefit is that the cube is more frozen and melts less rapidly. Almost all people enjoy that as well.

So, why would an ice maker technician tell someone that RO water will not function on an ice machine? I can’t help but to suspect that through his experience, he has witnessed many situations where he is summoned on a service job and noticed that when the RO Treatment Systems was turned off and the ice-maker was connected directly to the natural supply, it functioned. This however does not mean that a Reverse Osmosis Treatment Systems will not make ice cubes. When one supplies a considerable volume of water at an adequate pressure, any ice-maker will produce wonderful ice-cubes through reverse osmosis.

The challenge with a RO Systems on ice-makers, especially the bar style ice-makers, is that those types of ice machines use a tremendous supply of water. Believe it or not, some of those makers can use 80-90 gallons of water a day! Unless you have a high volume RO Systems, it is futile to try and generate Reverse osmosis water to that genre of ice-maker.

Another challenge is pressure. Many newer model ice machines need 30-40 PSI (pounds per square inch) to function properly. A home RO Systems drops the incoming pressure by 30-35% if you are starting out with 70-80 pounds per square inch, that is ok, but if the incoming water pressure is 40-60 pounds per square inch, there may be an obstacle. Volume and pressure are separate obstacles. You may have adequate pressure to operate an ice machine, but not sufficient volume and it’s not as simple as installing another tank with enough of volume and minuet pressure.

measuring a RO Treatment Systems is substantial when you have a few water outlets, especially if some of them are an under-the-counter ice-maker. Most in home reverse osmosis systems are 24 to 50 gallons per day, or GPD, which is not nearly adequate enough for such an ice-maker. Also, creation is decreased whenever the water temperature is less than 77 degrees F, and whenever the pressure is below 60 Pounds per square inch. In our world, a 50 GPD RO Treatment Systems in the Midwest will likely produce 20-25 GPD, when the demand can be up to 150 GPD.

There are many simple answers, and the awesome news is that they do not have to be considerably costly. One strategy is to install a bigger system, such as a 300 gallons per day reverse osmosis systems or a high production system, such as GE’s Merlin system, which produces 1/2 GPM of Reverse Osmosis water. Another idea is to super charge the pressure coming in with a booster pump or turbo charging the reverse osmosis system pressure to 80 pounds per Square Inch with a Demand Delivery Pump. This type of system will supply plenty of excellent, great-tasting RO Systems water, without ever running out! So, you can use RO Systems water on ice makers, and businesses, such as ours can even install RO Treatment Systems on very large non-residential machines. If we are able to do that, your residential ice machine will be simple} to [clean up and supercharge to Reverse Osmosis Treatment Systems ice. The key is properly sizing the RO Treatment Systems and pressure needed to glorify output. Look for a company that will do just that, and relax with a cold beverage and fresh ice.

For More Information about Reverse Osmosis and Water Softeners

other water treatment systems and informational water testing services

4 comments:

  1. Mixed drinks, on the rocks, shaken or stirred. The most important thing(besides the alcohol) is the ice. I've been using a cheap ice tray, and the ice chips into my drink. What is the best way to make ice for drinks/mixed drinks? What type of water? Ice tray? Anything else?

    web solutions

    ReplyDelete
  2. Нey vеry cool site!! Μan ..
    Beаutiful .. Amazing .. I will bookmark уour sіte
    and take the fеeԁѕ аlso…I'm happy to find so many useful info here in the post, we need develop more strategies in this regard, thanks for sharing. . . . . .
    My webpage ... elta eismaschine

    ReplyDelete
  3. Wonderful worκ! Τhis is the typе of info
    that should be ѕhared aгounԁ the web.

    Shame on Gοogle for not positіoning this post higher!
    Come on oveг and visit my web ѕite . Thanks =)
    my web page :: eis maschinen

    ReplyDelete