Showing posts with label softener. Show all posts
Showing posts with label softener. Show all posts

Monday, July 4, 2011

The Best Way to Make Ice

Article - Submitted by: jacob@water-softener-reviews.org
First of all, you can make ice cubes from water produced by RO Systems. In fact, ice made from reverse osmosis, or RO, water produces cleaner, clearer and better tasting ice cubes because most of the bacterias are removed from the water. So, just because water is purified by a certain procedure, (in this case, reverse osmosis), has no bearing on whether we can make ice. I prefer “clean ice” – in many cases it is perfectly see through, except for a little bubble in the center of the ice cube. Also the benefit is that the cube is more frozen and melts less rapidly. Almost all people enjoy that as well.

So, why would an ice maker technician tell someone that RO water will not function on an ice machine? I can’t help but to suspect that through his experience, he has witnessed many situations where he is summoned on a service job and noticed that when the RO Treatment Systems was turned off and the ice-maker was connected directly to the natural supply, it functioned. This however does not mean that a Reverse Osmosis Treatment Systems will not make ice cubes. When one supplies a considerable volume of water at an adequate pressure, any ice-maker will produce wonderful ice-cubes through reverse osmosis.

The challenge with a RO Systems on ice-makers, especially the bar style ice-makers, is that those types of ice machines use a tremendous supply of water. Believe it or not, some of those makers can use 80-90 gallons of water a day! Unless you have a high volume RO Systems, it is futile to try and generate Reverse osmosis water to that genre of ice-maker.

Another challenge is pressure. Many newer model ice machines need 30-40 PSI (pounds per square inch) to function properly. A home RO Systems drops the incoming pressure by 30-35% if you are starting out with 70-80 pounds per square inch, that is ok, but if the incoming water pressure is 40-60 pounds per square inch, there may be an obstacle. Volume and pressure are separate obstacles. You may have adequate pressure to operate an ice machine, but not sufficient volume and it’s not as simple as installing another tank with enough of volume and minuet pressure.

measuring a RO Treatment Systems is substantial when you have a few water outlets, especially if some of them are an under-the-counter ice-maker. Most in home reverse osmosis systems are 24 to 50 gallons per day, or GPD, which is not nearly adequate enough for such an ice-maker. Also, creation is decreased whenever the water temperature is less than 77 degrees F, and whenever the pressure is below 60 Pounds per square inch. In our world, a 50 GPD RO Treatment Systems in the Midwest will likely produce 20-25 GPD, when the demand can be up to 150 GPD.

There are many simple answers, and the awesome news is that they do not have to be considerably costly. One strategy is to install a bigger system, such as a 300 gallons per day reverse osmosis systems or a high production system, such as GE’s Merlin system, which produces 1/2 GPM of Reverse Osmosis water. Another idea is to super charge the pressure coming in with a booster pump or turbo charging the reverse osmosis system pressure to 80 pounds per Square Inch with a Demand Delivery Pump. This type of system will supply plenty of excellent, great-tasting RO Systems water, without ever running out! So, you can use RO Systems water on ice makers, and businesses, such as ours can even install RO Treatment Systems on very large non-residential machines. If we are able to do that, your residential ice machine will be simple} to [clean up and supercharge to Reverse Osmosis Treatment Systems ice. The key is properly sizing the RO Treatment Systems and pressure needed to glorify output. Look for a company that will do just that, and relax with a cold beverage and fresh ice.

For More Information about Reverse Osmosis and Water Softeners

other water treatment systems and informational water testing services

Friday, August 13, 2010

MAGNESIUM IN DRINKING WATER

MAGNESIUM IN DRINKING WATER


The UN’s World Health Organization (WHO) has just recommended that drinking water contain 25-50 mg of magnesium per liter to prevent deaths from heart attack and stroke: www.MgWater.com/download American bottled water averages <5 mg of magnesium (Mg) per liter, while bottled water in the rest of the world averages about 20 mg of magnesium per liter. The US National Academy of Sciences estimated that the US deaths from soft water were 150,000 per annum, and that was in 1977!

The FDA and the US Department of Justice (DOJ) caused the Mg-deficient-water problem by Un-Constitutionally destroying the American mineral water industry in the 1930’s, in the mistaken belief that pure water was good, and that mineral water was just impure water. No other country has ever destroyed their mineral water industry.

For decades, the evidence has been overwhelming that Americans are very deficient in Mg, as evidenced by the 23% shortfall from the RDI, yet the FDA and DOJ have covered up their blunder, getting a Federal lawsuit dismissed before the evidence could be shown, and keeping silent about the millions of deaths indicated by over 50 epidemiological studies from nine countries. Recent studies clearly confirm that water-borne Mg is far, far better in preventing cardiovascular pathologies than food-borne Mg.

Epidemiological studies indicate that millions of Americans have died due to the FDA’s and DOJ’s destruction of the American mineral water industry. See:

www.mgwater.com/anderson.shtml
www.mgwater.com/finland.shtml
www.mgwater.com/lancet.shtml
www.mgwater.com/singh.shtml
Now, it is up to the FDA and DOJ to end this travesty, requiring the Mg content of bottled or canned beverages to be put in labels’ nutrition panels, and requiring that all bottled or canned beverages contain at least 25 mg of Mg per liter. FDA and DOJ have ignored petitions and a lawsuit, continuing to cause vast numbers of deaths just to cover-up their blunder.

It is not practical to fortify tap water with magnesium, because 99% of tap water is used for washing, flushing, etc., not drinking, so the cost of fortifying tap water would be prohibitive.
The best way of Mg-fortifying beverages is with "magnesium bicarbonate", as the bicarbonate has the added benefit of reversing the harmful acidification found in aging bodies. Magnesium bicarbonate is made by adding magnesium carbonate to carbonated water, which reacts.


Paul Mason, Mg Librarian
http://www.mgwater.com/
Adobe Springs Water Co. LLC
paulmason@MgWater.com


Note:  I tend to agree that softened water is not the best and water with very high hardness, i.e., very hard water, can create aesthetic problems (staining, coatings, films, difficulty washing using soaps, etc)- This article is not an endorsement of the product or company.

More inforamtion on water quality - Free Booklet at
http://www.wilkes.edu/water