Showing posts with label private well water testing. Show all posts
Showing posts with label private well water testing. Show all posts

Monday, January 5, 2015

Water Test Kits Private Well Water Dinking Water Testing

Water Test Kits - Private Well Owner Guide - Get Your Water Tested - Get a Kit !
On the federal level,  there are no specific construction standards for private wells, but some states and local agencies have passed standards related to siting, construction, testing, and maintenance.   Even if this is the case, the guidelines, standards, or regulations require the well owner to be the manager of their own drinking water supply.    This is only a short summary of the information and general recommendations for private well owners. 
There are a number of steps to this process and well will break them down as follows:
Well Placement
Well Construction
Well Testing (Yield and Quality)
Well Maintenance
Annual Water Testing
Well Placement
In general, the primary guidance with to water well placement in Pennsylvania is that a water well should be 100 feet from a septic system (regulated), 50 feet from a septic tank (regulated), 10 feet from a sewer line under pressure (regulated), and 10 feet from a property line. To be honest, these isolation distance do not consider impacts from other natural conditions or activities.  In general, we  would recommend the following:
1. If possible, the private well owner should control all activities within a 50 to  100 foot radius of the wellhead, i.e.., top of the water well. These activities should include: use of pesticides and herbicides, storage of toxic or hazardous chemicals, storage or management of manure and other waste, diversion of surface water and runoff, overuse of the area by grazing animals, location of burrow pits, burn pipes, rubbish storage, or storage of used cars or other items that may contain antifreeze, oils, and greases.
2. Well casing should extend at least 12 inches above grade.
3. Well should be fitted with a sanitary well cap that has some form of venting.
4. The well should be located at least 10 feet from a property line.
Other suggested isolation distances
Delineated wetlands or floodplains (25 feet)- with top of casing 3 feet above flood elevation.
Surface waters (25 feet) Storm water Systems (25 feet)
BioInfiltration Stormwater Systems (50 feet +)
Spray Irrigation/ Septage Disposal (100 feet+)
Sinkholes and Closed Depressions (100 feet +)
Farm silos / manure storage (200 feet) Septic Systems (100 feet)
Septic Tanks/Holding Tanks (50 feet)
Chemical Storage/Preparation Area (300 feet)
Well Construction
1. Prefer the use of steel casing that extends at least 15 feet to 20 feet into firm bedrock or 60 feet below ground, whichever is greater.
2. Casing should be of  adequate wall thickness to deal with corrosion and stress – 19lb casing.
3. The base of the casing should contain a driveshoe on the bottom of the casing and casing centralized in the borehole.
4. Wells drilled by a licensed well driller using only potable water as the drilling fluid.
5. Casing should be double circumferential welded or threaded casing
6. Well caps should be sanitary well caps that are properly vented.
7. Annular space should have a grout layer that is at least 1.5 inches thick.
8. Pitless adapters should be used over well pits.
Well Testing (Yield and Quality)
After the well is drilled, the well should be developed using surging, air-lift, or pumping the well.  This is done to clean out the well cuttings and improve yield.  In some cases, this needs to be done to improve the efficiency of the borehole. If the well yield is low, some well drillers will hydrofrac the well. If you are going to hydrofrac a water well, we recommend zone hydraulic fracturing to isolate the deeper potential water-bearing zones.   After the well development has been completed, a shock wellbore disinfection should be conducted.  The well should be allowed to fully recover and a minimum 2-hour yield test is recommend.  After the yield testing, the well should be shock disinfected.  For information on shock disinfection – we recommend visiting Water-Research Center.   The well yield data should include the static water level (water level before pumping), maximum dynamic water level (maximum depth to water during pumping), pumping rate, and length of the pumping test.  This data should be included on the well log and the specific capacity of the well should be reported.  The specific capacity is the rate of yield or gallons per minute per foot of drawdown.  The drawdown is the difference between the static and dynamic water level measurement. 
Before the end of the yield testing, it is recommended that a general water quality analysis of the well be conducted.  This testing should include bacterial quality, general water quality, and specific parameters that are known problems for your region.  Do not rely on a free water analysis or a basic water quality screening down by the well driller.  This should be either information or certified testing conducted by a laboratory.  For information on this type of testing, please contact the Water-Research Center.   The center offers a number of water testing options, screening tests, and special packages for city water users and private well and spring systems.  The initial water quality testing data should be reviewed and evaluated.  This evaluation should include the need for any further action to improve the well security, continue with well development, or add equipment to improve well water quality.  In some cases, water treatment systems are installed as an additional barrier or layer of protection.  In many cases, the only type of additional treatment that is needed is a whole-house particle filter and a sanitary well cap.  For information on Do-it-Yourself Water Treatment Systems.
Well and System Maintenance
At a minimum, the well water system should go through an annual inspection.  This inspection could be associated with the annual water quality test or inspection of any water treatment systems.  During this evaluation, the aesthetic quality of the water should be evaluated and some basic field water quality screening should be conducted.   For the field water screening, it is possible this can be done using a number of low-cost meters or an informational water quality screening test.  Not sure of the nature of the Problem - Check out the Water Quality Well Guide or Some Case Studies.
Annual Water Testing
Depending on the results of the initial evaluation, the results should be evaluated to determine what are the water quality parameters that should be monitored to help track the general water quality of the well.  If a water treatment system was installed, the annual water quality evaluation should include the performance of the water treatment system.  If you need help with determining what you need, WE can Help !    Our Mail Order Program - Get the Water Testing Results and a Review of the Findings with NO Sales Pitch. Why ? Because we do not Sell Water Treatment !
If you are in Pennsylvania, please check out the The Keystone Clean Water Team can provide guidance on the selection of water quality parameters, review water quality data, and make recommendations on the water quality parameters.  If you are interested, you may want to obtain a copy of our Educational Booklet and Brochure.
Arsenic, bacteria, lead, trace metals, benzene, toluene, chloride, sulfate, phosphate, sodium, potassium, lead, aluminum, chromium, manganese, iron, cancer causing agents, water quality case studies

Wednesday, July 10, 2013

Water Testing in Pennsylvania Groundwater Contamination Water Test Kits

We have permitted the posting of a guest blog by the Carbon County Groundwater Guardians.   The  Carbon County Groundwater Guardians (CCGG) is a 501(c)(3) non-profit, volunteer, environmental education organization which provides homeowners with information on private wells, water quality and quantity, and septic systems. We are dedicated to protecting private well owners from illnesses caused by our drinking water. We advance good groundwater stewardship by raising awareness on a variety of groundwater issues that affects everyone with a private water supply.

We can help you get your water tested at the lab of your choice and explain the test results.   We recommend testing the water of every residential well on a regular basis. If the water was never tested, a comprehensive test should be done first. Based on the results of the test, follow-up testing should be done as needed. Testing for bacteria should be done at least once a year, but this is the minimum.

This testing is needed because your water quality can diminish due to changes in your water usage, in weather conditions, in your neighborhood etc. This is the reason why public water suppliers are required by law to constantly monitor the water they provide. If you notice any change in your water, it should be tested immediately.

For example, the state of Pennsylvania issues no standards for private well water quality. The only time the state gets involved is when there is pollution due to spills, leaking tanks or industrial activity that has been permitted by the agency.

If your well water contains bacteria, for example, Pennsylvania’s Department of Environmental Protection (PADEP) will tell you to buy bottled water or give you a pamphlet, which explains how to shock chlorinate your well. That’s it. It’s up to you to fix any and all problems. Yes, you’re completely on your own.

In order to fix problems that could be threatening you or your family’s health, you first have to know a problem exists. How can you find out if your well water is safe? There is a very simple answer, and only one answer. Test your water.

If you have a private well, you’re an unregulated water company. If you also have a septic system, you’re an unregulated sewage company. It’s common for septic discharge to pollute the water in your and your neighbor’s well.

You don’t have to live next to a superfund site to have problems. Nature put many dangerous substances into the ground and we can add to it by what our neighbors and we do in our own backyards. A few facts about PA Groundwater and Private Wells:

1. About 30 to 50% of private wells have an elevated level of total coliform.
2. About 15 to 20% of private wells have e. coli.
3. About 6 to 8 % have elevated levels of arsenic.
4. About 20 to 30% have elevated levels of iron.
5. About 10 to 20 % have elevated levels of manganese.
6. Less than 5 % have elevated levels of chloride, barium, strontium, total dissolved solids, radiological issues, and/or methane (above 7 mg/L).
Source: Citizens Groundwater and Surfacewater Database (Oram, 2012)

A part of CCGG’s Mission is to offer advice to homeowners with a private well and septic system, and it’s free. The advice comes primarily from local Universities and Experts in Water Quality. Because of Natural Gas Development in Pennsylvania, it is critical to consider the need for water testing. Water testing can fall into three broad categories.

1. Informational Water Testing – This can be a screening test that is performed annually to check on the status of the system or if you suspect a problem. Typically, these informational water test programs use certified laboratory methods, but the results are not suitable for any legal action.

2. Certified Testing – this is testing where you may collect the sample and send it to a local certified testing laboratory. Because you are not an unbiased third-party sampler, this type of testing may not hold up in court, but this is a great screening test.

3. Baseline Water Testing – this is where third party unbiased professionals collect the water sample, conduct field testing, and deliver the sample to a certified testing laboratory. This has the highest level of protection and the data would be suitable for court. (Note- If you conduct baseline testing in PA, please support the Citizens Groundwater and Surfacewater Database- It is Free !)

We are in the process of working with a National Laboratory to offer informational water testing by mail as a screening test for our supports or local certified laboratories with trained samplers to offer third-party baseline testing in Pennsylvania, New York, Ohio, Kansas, West Virginia, and Texas. If you are looking for testing, we would recommend that you contact us with your questions and type of assistance you need.

New Booklet on Water Quality in Pennsylvania (Proceeds from the Sale of this Book Support the Carbon County Groundwater Guardians)

After Getting the water tested, it is critical to identify and fix any problems.  Some can be easily fixed by changing the well cap, diverting surfacewater away from the water source, and other minor changes, but some may require more significant modifications to the well and/or long-term treatment.   It is our hope as the Carbon County Groundwater Guardian program grows in PA we will be able to assist well owners with fixing their water wells.  To learn more how you can help this Organization, please visit our webportal, Facebook,  Become a Partner, What Do Private Well Owners Need in PA (tell us) and our blog.

Notice - Offering a Free Educational Program in Luzerne County, PA (Learn More)

Volunteer
We seek new people at all skill levels for a variety of programs. One thing that everyone can do is attend meetings to share ideas on improving CCGG, enabling us to better understand and address the concerns of well owners.
Everything we do began with an idea.
We realize your time is precious and the world is hectic. CCGG’s volunteers do only what they’re comfortable with. It can be a little or a lot.
For more information, please go to CCGG’s About Page or contact us.
Carbon County Groundwater Guardians is a 501(c)(3) IRS approved nonprofit, volunteer organization and your donation is tax deductible to the extent allowed by law.  Help the Organization and Get Your Water Tested or Order the Private Well Owner Guide (proceeds benefit This Organization).