Tuesday, August 14, 2012

How To Clean and Remove Iron and Manganese Staining


Iron and manganese are non-hazardous elements that can be a nuisance in a water supply. Iron and manganese are chemically similar and cause similar problems. Iron is the most frequent of the two contaminants in water supplies ; manganese is typically found in iron-bearing water.  Iron and manganese are common metallic elements found in the earth's crust. Water percolating through soil and rock can dissolve minerals containing iron and manganese and hold them in solution. Occasionally, iron pipes also may be a source of iron in water. In deep wells, where oxygen content is low, the iron/manganese-bearing water is clear and colorless (the iron and manganese are dissolved). Water from the tap may be clear, but when exposed to air, iron and manganese are oxidized and change from colorless, dissolved forms to colored, solid forms.

Oxidation of dissolved iron particles in water changes the iron to white, then yellow and finally to red-brown solid particles that settle out of the water. Iron that does not form particles large enough to settle out and that remains suspended (colloidal iron) leaves the water with a red tint.  Manganese usually is dissolved in water, although some shallow wells contain colloidal manganese (black tint).  These sediments are responsible for the staining properties of water containing high concentrations of iron and manganese. These precipitates or sediments may be severe enough to plug water pipes.  Iron and manganese can affect the flavor and color of food and water. They may react with tannins in coffee, tea and some alcoholic beverages to produce a black sludge, which affects both taste and appearance. Manganese is objectionable in water even when present in smaller concentrations than iron.  Iron will cause reddish-brown staining of laundry, porcelain, dishes, utensils and even glassware. Manganese acts in a similar way but causes a brownish-black stain. Soaps and detergents do not remove these stains, and use of chlorine bleach and alkaline builders (such as sodium and carbonate) may intensify the stains.

OK - How do I clean my dishwasher?

1
. Kool-Aid ? - "First check with the manufacturer".a. Pour a packet of unsweetened lemonade Kool-Aid into the soap dispenser.
b. Run the dishwasher through a hot-water cycle.
c.
After you are done - open the door and see the results.
2. Vinegar -First check with the manufacturer
a.
Pour 1 cup of white distilled vinegar into another bowl. Set the bowl inside the bottom rack of the dishwasher.
b. Run the dishwasher on a regular cycle. As the vinegar sloshes around and creates steam with the hot water, it will help loosen remaining hard water stains while washing away the manganese stains you removed.
It has been suggested that Tang and Glisten Dishwater Cleaner (Purchase) may also work.  Also - Super Iron Out (Purchase).

One of the easier solutions is to avoid this problem is to avoid the use of chlorine-based detergents.   

a. Use "Chlorine- Free" Products - such as  check the list of ingredients printed on the package and if it contains chlorine, don't buy that one.  There are two product lines that we have been made aware of that are "chlorine-free";  Seventh Generation and Bi-O-Kleen.     

More Information

Iron and Manganese - Dishwasher / Clothes Washer
Hard Water
How to Shock Disinfect a Well
Odor Problems, Cause, and Action
Odors in Hotwater and Sulfur (Rotten Egg Odors)

Well Biofouling

Arsenic Drinking Water Private Wells Ohio

Ohio begins testing of Arsenic levels in drinking water- B.F. Environmental Consultants Inc and the Water Research Center has been recommending private well water testing and we strongly recommend that water water be tested annually.  Our first post on this subject dates back to 2000.
Arsenic is a semi-metal, a member of the nitrogen family. It occurs naturally in the earth and in the seas. It is odorless and tasteless. Arsenic is an element (As) that occurs in the earth’s crust-rock, soil, all natural sources of exposure, or can be traced to deep water brines used to produce oil and natural gas.    Consumption of food and water are the major sources of arsenic exposure for the majority of US citizens.  People may also be exposed from industrial sources, as arsenic is used in semiconductor manufacturing, petroleum refining, wood preservatives, animal feed additives, and herbicides. 

Arsenic can combine with other elements to form inorganic and organic arsenicals. In general, inorganic derivatives are regarded as more toxic than the organic forms. While food contains both inorganic and organic arsenicals, primarily inorganic forms are present in water. Exposure to arsenic at high levels poses serious health effects as it is a known human carcinogen. In addition, it has been reported to affect the vascular system in humans and has been associated with the development of diabetes. 

As compared to the Western part of the United States,  it is relatively rare  contaminant in Pennsylvania groundwater supplies.  A recent survey by the U.S Geological Survey (USGS) found that arsenic exceeded 5 ppb in 5% of wells in Pennsylvania.  Recent work in Northeastern Pennsylvania - indicates that it that the occurrence may be slightly higher.  For Ohio, it is likely that less than 5 % of wells will have elevated levels of arsenic.

For more information on Arsenic - Visit Our Arsenic Website
other Resources


Actions:
1. Get your Water Tested and encourage your neighbors to do the same.
2. Compile information on the types and location of hazardous waste and industrial sites in your area.
3. Contact your States Environmental Protection Division.
4. Other water testing services- Water Check Testing Packages - multiple packages to fit your needs.
5. Testing Kit for Arsenic (100 tests- Only $ 1.70 per test-),  Private Well Arsenic Screen (2 tests - $ 15.00 per test) 
6. Arsenic Treatment systems and other treatment systems
7. Private Well Survey for Ohio - Related to Natural Gas Development
8. Our Drinking Water Helpguide